Huawei MTS9300A - Optional) Installing a Digital Temperature and Humidity Sensor

4.3.1 (Optional) Installing a Digital Temperature and
Humidity Sensor
Procedure
Step 1 Attach the digital temperature and humidity sensor to the side panel of the
cabinet.
NO TE
There is a magnet at the bottom of the digital temperature and humidity sensor, which can
be directly attached to the cabinet.
Figure 4-4 Installing a digital temperature and humidity sensor
Step 2 Connect the communications cable for the digital temperature and humidity
sensor to the COM port on the communications expansion module or UIM.
NO TE
The communications cables in the gures are connected to UIM.
Figure 4-5 Installing a communications cable for a digital temperature and
humidity sensor
Step 3 Set the DIP address.
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 4 Installing Components
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 26