Huawei MTS9300A - Page 43

Figure 5-11 Installing power cables for the DCDB48-200-16B intelligent power
distribution unit
Step 2 Install DC output power cables for the intelligent power distribution unit.
Figure 5-12 Installing DC output power cables for the intelligent power
distribution unit
(1) DC load
Step 3
(Optional) Set the DIP address.
NO TE
When multiple intelligent power distribution units are cascaded, set the DIP address.
1. Remove the DMU02C1.
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 5 Installing Cables
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 37