Huawei MTS9300A - A Technical Specifications; A.1 Environment Specifications

Figure 8-8 Internet Explorer security setting 5
Step 8 Click OK.
----End
Setting SMU Parameters
Step 1 Apply for a xed IP address to the site or equipment room network administrator.
Step 2 Set the IP address, subnet mask, and gateway address on the SMU LCD.
Table 8-8 IP parameters
Main
Menu
Second-Level
Menu
Third-Level
Menu
Default Value Setting
Setting
Wizard
Network
Parameters
IP Address 192.168.0.10 Set this parameter according to
the address information
provided by the network
administrator.
Subnet Mask 255.255.255.0 Set this parameter according to
the address information
provided by the network
administrator.
Default Gateway 192.168.0.1 Set this parameter according to
the address information
provided by the network
administrator.
----End
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 8 Commissioning
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 63