Huawei Quidway S2000-EI Series

Installation Manual
Quidway S2000-EI Series Ethernet Switches Chapter 1 Product Overview
1-14
Item S2000-EI Series Ethernet Switches
Power supply
S2008-EI uses external power supply. The input voltage and output voltage are
as follows:
Input rated voltage: 100 -- 240 V a.c.; 50/60 Hz
Input maximum tolerance: 90 -- 264 V a.c.; 50/60 Hz
Output voltage: 12 V d.c
Output current: 1A
The input voltage supported by S2016-EI and S2403H-EI are as follows:
AC:
Rated voltage:100 -- 240V a.c.; 50/60Hz
Max. tolerance:90 -- 264 V a.c.; 50/60Hz
DC:
Rated voltage:-48 to -60 V d.c.
Maximum tolerance:-36 to -72 V d.c.
Power
consumption (full
load)
S2008-EI: 8 W
S2016-EI: 12 W
S2403H-EI: 15 W
Operation
temperature
0 -- 45 C
Operation
humidity(non-co
ndensing)
10% -- 90%
Table 1-14 S2000-EI Series service features
Feature Functionality
Wire speed L2
switching
All the ports support wire speed forwarding
Switching capacity:
S2008-EI: 6.4 Gbps
S2016-EI: 6.4Gbps
S2403H-EI: 9.6 Gbps
Packet forwarding rate:
S2008C: 1.1 Mpps
S2016-EI: 2.53 Mpps
S2403H-EI: 3.87 Mpps
Switching mode Store and Forward