NOTE
For convenience, only four devices in the Layer 2 network are described.
Figure 3-3 Networking diagram of configuring basic HGMP functions for a cluster
IP/MPLS
core
......
FTP Server
2.0.0.1/8
SFTP Server
2.0.0.2/8
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Administrator-1
10.0.0.1/8
Member-1
Member-2
Member-3
10.0.0.4/8
Ethernet0/0/1 Ethernet0/0/2
Ethernet0/0/1
Ethernet0/0/2
Ethernet0/0/1
Ethernet0/0/1
Cluster
Ethernet0/0/3
Ethernet0/0/1
1.0.0.2/8
Device MAC address Device MAC address
Administrator-1 0001-0001-0001 Member-1 0002-0002-0002
Member-2 0003-0003-0003 Member-3 0004-0004-0004
Configuration Roadmap
The configuration roadmap is as follows:
1. Create a management VLAN on all devices. Enable NDP and NTDP to ensure that each
device can detect the topology structure of the network through NTDP.
2. Choose the administrator switch, and then create a cluster named HUAWEI on the
administrator switch.
3. Add all the devices that support HGMP in the Layer 2 network to the cluster.
4. Assign an IP address to VLANIF 10 to facilitate the communication between member
switches in the cluster and devices out of the cluster.
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110
To Next Page
Loading...
