4 Unpacking a Switch
Context
A switch and its cables, cards, and power modules usually ship in cartons. This section
describes how to unpack a 442.0 mm x 220.0 mm x 43.6 mm (17.4 in. x 8.7 in. x 1.72 in.)
switch model. The methods for installing switch models of other dimensions or other
components are similar.
NOTE
l Before opening the package, check whether the seal label or package is damaged. If there are signs
of damage, stop unpacking and contact the supplier.
l Moving an unpacked switch over a long distance may damage the switch. Do not unpack the switch
until you are ready to begin installation.
l Save the carton and packing material in case of future transportation.
Tools
l Protective gloves
l Utility knife
Procedure
Step 1 Wear protective gloves to protect your hands.
Step 2 Check the label on the carton to confirm whether the switch model is correct.
Step 3 Use a utility knife to cut the adhesive tape around the cover of the carton.
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
4 Unpacking a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
To Next Page
Loading...
