Figure 5-14 Security slot marked with padlock icon
----End
5.4 Scenario 3: Wall Mounting
Context
This installation method applies to all switch models except the S3700-HI, S5700-HI,
S6720S-EI, and 420 mm deep switches.
DANGER
Before drilling holes on a wall, make sure that no power cables are hidden in the wall.
NOTICE
l For a wall-mounted switch (S5720-16X-PWH-LI-AC needs to be installed with the port
side facing up), take water-proofing and dust-proofing measures to protect the switch from
damage caused by water and dust.
l Ensure that there are no flammable or explosive materials nearby the switch.
l Ensure that the switch has at least 100 mm (3.9 in.) free space in all directions.
Tools and Accessories
l Protective gloves
l ESD wrist strap or ESD gloves
l Phillips screwdriver
l Hammer drill (with φ8 drill bit)
l Adjustable wrench
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
5 Installing a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
37
To Next Page
Loading...
