Huawei S2700 - Using Front Mounting Brackets or Cable Management Frames and Rear Mounting Brackets

Figure 5-4 Installing rear mounting bracket guide rails (475-566 mm [18.7-22.3 in.] between
front and rear mounting rails)
Step 6 Install the switch in the cabinet. In Figure 5-5, the distance between front and rear mounting
rails is 521-566 mm (20.5-22.3 in.).
1. Align the rear mounting brackets with the rear mounting bracket guide rails. Then,
gently slide the switch into the cabinet along the guide rails.
2. Align the holes on the front mounting brackets with the floating nuts on the front
mounting rails, and secure each from mounting bracket with two M6 screws using a
Phillips screwdriver.
Figure 5-5 Installing the switch in the cabinet
b
a
----End
5.2.3 Using Front Mounting Brackets or Cable Management
Frames and Rear Mounting Brackets
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
5 Installing a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30