Huawei S2700 - Page 46

l Marker
l M4 screws (four or six, depending on the switch model. See Figure 5-15.)
l M6 expansion bolts (four per switch, purchased separately)
l Front mounting brackets (two per switch)
NOTE
The M4 screws and front mounting brackets are included in the installation accessory package.
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. When wearing an ESD wrist strap, ensure that it is in
close contact with your wrist and grounded properly.
Step 2 Use M4 screws to attach a front mounting bracket to each side of the switch. The type of
mounting brackets and the installation method differ depending on switch model. Figure 5-15
shows the installation methods of different mounting brackets.
Figure 5-15 Installing mounting brackets
Step 3 Place the switch against the wall and mark the drilling positions through the holes of the
mounting brackets. See Figure 5-16.
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
5 Installing a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38