Figure 5-16 Marking the drilling positions
Step 4 Install M6 expansion bolts in the wall.
1. Use a hammer drill (with φ8 drill bit) to drill holes in the marked positions.
2. Insert M6 expansion bolts into the holes and tighten the nuts to secure the bolts in place.
3. Loosen and remove the nuts from M6 expansion bolts.
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
5 Installing a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
39
To Next Page
Loading...
