Step 6 Take the switch out of the ESD bag and check switch surfaces and the warranty seal on the
switch. If the switch is found eroded or damp or if the warranty seal is damaged, stop
unpacking and contact the supplier.
NOTE
Huawei is unable to provide warranty services if the warranty seal is damaged or removed.
Step 7 Check whether the nameplate on the chassis is consistent with the label on the carton. The
nameplate is attached to either the top or bottom of the chassis.
----End
Follow-up Procedure
Save the installation accessory package for later use. The installation accessory package
contains the following items: ground cable, mounting brackets, screws, rubber pads, dust
plugs, and the Open Source Software Notice. The Quick Start Guide package also contains the
warranty card.
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
4 Unpacking a Switch
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
To Next Page
Loading...
