58
specify that the value must equal (eq) or not equal (
neq
)
the specified value, or you can select any to enable the
rule to be invoked on all ICMP packets. This field will be
dimmed (unavailable for entry) unless you specify ICMP as
the protocol.
z
IP Frag Pkt: Determines how the rule applies to IP packets
that contain fragments. You can choose from the following
options:
z
Yes: The rule will be applied only to packets that
contain fragments.
z
No: The rule will be applied only to packets that do not
contain fragments
z
Ignore: (Default) The rule will be applied to packets
whether or not they contain fragments, assuming that
they match the other criteria.
z
IP Option Pkt: Determines whether the rule should apply
to IP packets that have options specified in their packet
headers.
z
Yes: The rule will be applied only to packets that
contain header options.
z
No: The rule will be applied only to packets that do not
contain header options.
z
Ignore: (Default) The rule will be applied to packets
whether or not they contain header options, assuming
that they match the other criteria.
z
Packet Size: Specifies that the IP Filter rule will take affect
only on packets whose size in bytes matches this criterion.
(
lt
= less than,
gt
= greater than,
lteq
= less than or equal
to.)
To Next Page
Loading...
