Copyright © Huawei Technologies Co., Ltd.
− Automatic: The MDU automatically searches for available IP addresses in the
connected network. Ensure that the MDU and PC are on the same network segment.
After you restart the device, IP address allocation changes back to Manual. The IP address is set to
the IP address set previously.
Ensure that the SmartLi IP address is unique on the network segment. Otherwise, the WebUI display
function may not function properly.
Table 4-5 System Settings
Specifies the total number of
combined cabinets.
Table 4-6 Settings Wizard
Set based on site
requirements.
Date format, YYYY-MM-DD, Time zone,
Time
Set based on site
requirements.
IP Address allocation, IP address, Subnet
mask, Gateway
Set based on site
requirements.
Set based on site
requirements.
Table 4-7 User Settings
Two languages are supported.
Specifies the date format.
Set based on site requirements.
Set based on site requirements.
Set based on site requirements.
The password can be changed.
Set based on actual requirements.