Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-14 Stripped length (unit: mm)
Step 2 Insert the exposed area of the positive and negative power cables into the metal terminals of
the positive and negative connectors respectively and crimp them using a crimping tool, as
shown in Figure 5-15. Ensure that the cables are crimped tightly such that they cannot be
pulled out by a force less than 400 N.
Figure 5-15 Crimping a metal terminal
Step 3 Insert the crimped positive and negative power cables into the corresponding positive and
negative connectors until a "click" sound is heard.
Figure 5-16 Inserting positive and negative connectors
To Next Page
Loading...
