Huawei SUN2000-33KTL User Manual

SUN2000-(33KTL, 40KTL)
User Manual
4 Installation
Issue 03 (2015-12-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
Figure 4-8 Moving the SUN2000
Step 2 Carry the SUN2000 out of the packing case and move it to the installation position.

To prevent device damage and personal injury, keep balance when moving the SUN2000
which is heavy.

Do not place the SUN2000 with its wiring terminals contacting the floor because the
power ports and signal ports at the bottom of the device are not designed to support the
weight of the SUN2000. Place the SUN2000 horizontally.

When placing the SUN2000 on the floor, put foam or paper under the SUN2000 to protect
its enclosure.
----End
4.3.3 Installing a Rear Panel
Before installing the SUN2000, secure the shipped rear panel to a wall.
Prerequisites
Figure 4-9 shows the dimensions of the rear panel.

Huawei SUN2000-33KTL Specifications

General

Purpose	Solar panel
Efficiency	98.6 %
Output power	30000 W
Weatherproof	Yes
Certification	EN 62109-1/-2, IEC 62109-1/-2, IEC 62116
Input voltage	250 - 1100 V
Output current	43.3 A
Output voltage	230/400 V
Input frequency	- Hz
Power supply type	Outdoor
Power current type	DC-to-AC
Adjustable output voltage	-
Power protection features	Over current
International Protection (IP) code	IP65
Product color	White
Operating temperature (T-T)	-25 - 60 °C
Operating relative humidity (H-H)	0 - 100 %
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	283 mm
Width	930 mm
Height	550 mm
Weight	62000 g