When the configuration export is completed, there are three files in the root directory of the USB flash
drive: one boot script file and two exported files.
----End
7.1.2 Importing Configurations
Import the inverter configurations through a USB flash drive.
Prerequisites
You have exported configurations, and the exported files are complete.
Context
USB flash drives of SanDisk, Kingston, and Netac are recommended. Other brands may be
incompatible.
Procedure
Step 1 On the SUN2000 local commissioning tool, click Inverter Command Settings to generate a
boot script file. For details, see SUN2000 APP User Manual.
Step 2 Import the boot script file to a computer.
Step 3 Replace the exported boot script file in the root directory of the USB flash drive with the
imported one.
Replace the boot script file and keep the exported files.
Step 4 Connect the USB flash drive to the USB port. The system automatically identifies the USB
flash drive and executes all commands specified in the boot script file. View the LED
indicator to determine the operating status.
Verify that the ciphertext in the boot script file matches the login password of the SUN2000
APP. Otherwise, after you insert the USB flash drive for five consecutive times, the user
account will be locked for 10 minutes.
Table 7-2 Indicator status
To Next Page
Loading...
Need help?
General
Weight and Dimensions
