Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
After the SUN2000 powers off, the remaining electricity and heat may still cause electrical
shock and body burns. Therefore, only begin servicing the SUN2000 five minutes after the
power-off.
Procedure
Step 1 Run a shutdown command on the SUN2000 APP, SmartLogger, or NMS.
For details, see SUN2000 APP User Manual, SmartLogger1000 User Manual, or NetEco
1000S User Manual.
Step 2 Switch off the circuit breaker between the SUN2000 and the power grid.
Step 3 Set the DC SWITCH to OFF.
----End
To Next Page
Loading...
