Huawei SUN2000-M3 User Manual

Technical
Specications
SUN2000-20K
TL-M3
SUN2000-29.
9KTL-M3
SUN2000-30K
TL-M3
SUN2000-36K
TL-M3
SUN2000-40K
TL-M3
Maximum
total
harmonic
distortion
(THD)
AC THDi
< 3% under rated conditions. Single harmonic meets the VDE4105 requirements.
Note a: Under the Germany VDE-AR-N-4105, Belgium C10/11, and Austria TOR grid codes, the
maximum apparent power and the maximum active power (cosΦ=1) of the SUN2000-30KTL-M3
are 30,000 VA and 30,000 W respectively.
Protection
Technical
Specications
SUN2000-20K
TL-M3
SUN2000-29.
9KTL-M3
SUN2000-30K
TL-M3
SUN2000-36K
TL-M3
SUN2000-40K
TL-M3
Overvoltage
category
PV II/AC III
Input DC
switch
Supported
Islanding
protection
Supported
Output
overcurrent
protection
Supported
Input reverse
connection
protection
Supported
String fault
detection
Supported
DC surge
protection
Type II
AC surge
protection
Type II
Insulation
resistance
detection
Supported
Residual
current
monitoring
unit (RCMU)
Supported
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual 10 Technical Specications
Issue 11 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 90

Huawei SUN2000-M3 Specifications

General

Type	String Inverter
Rated AC Grid Frequency	50 Hz / 60 Hz
DC Connection Type	MC4
Protection Degree	IP65
Cooling Method	Natural convection
Category	Inverter
Adjustable Power Factor Range	0.8 leading - 0.8 lagging
Total Harmonic Distortion (THD)	≤ 3 %
Operating Temperature Range	-25°C to 60°C
Communication	RS485
Efficiency	98%
Protection Level	DC reverse polarity protection, AC overcurrent protection, AC short-circuit protection, Overvoltage protection, Insulation monitoring, Residual current monitoring unit, Arc fault detection