Huawei SUN2000L Series - 7.5 App Operations by the User; 7.5.1 Logging In to the App

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
Setting the Router Connected to the SUN2000L
To set the parameters for the router connected to the SUN2000L, choose Comm config >
Inverter connected router settings from the Operation console screen.
Figure 7-36 Inverter connected router settings
Before the Inverter WiFi settings screen is displayed, the app sends a command to start scanning. Then
the SUN2000L starts to scan nearby WiFi networks and sends the list of WiFi networks to the app.
Table 7-7 Description of the parameters on the Inverter connected router settings screen
Parameter
Description
Value Range
To wireless router
Controls whether to connect
the SUN2000L to a router.

Disable

Enable
Network
Specifies the SSID of the
router to which the inverter
WiFi network connects.
N/A