Rear Drive Backplane Cabling for a Server with I/O Module 2
Figure 3-9 Rear drive backplane cabling
Table 3-9 Rear drive backplane cabling
No.
Connectors and Cable Part No.
1 Power cable for connecting the mainboard (J9) to
the drive backplane for I/O module 2 (J1)
04150448-00
1
2 SAS cable for connecting PORT B of the riser card in
I/O module 2 to the rear drive backplane (J2)
04051059
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 3 Internal Cabling
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 49
To Next Page
Loading...
