EasyManuals Logo

Husqvarna AUTOMOWER 430X Technical Manual

Husqvarna AUTOMOWER 430X
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
English - 43
3.9 Safe operation on slopes
To achieve the best mowing results and operating
safety even when parts of the working area are slop-
ing, the mower adjusts its operation automatically
depending on factors such as the slope angle and di-
rection of travel.
The working area’s incline can be expressed in various
ways. Table 2: Slope conditions sets out the relation-
ship between the different ways of expressing slopes
as a percentage, height-length-ratio and in degrees.
The specied slope on which the robotic
lawnmower can work is 45%. Accessibility on
steeper slopes than this cannot be guaranteed.
If the robotic lawnmower is traveling forwards
and the incline is more than 67% the mower
stops. It will then reverse and turn in one
movement to try to nd a less steep slope. If
after 2 attempts the mower cannot nd a less
steep slope, it stops and the display indicates
that the stop is caused by a steep incline.
The above values are approximate and require for in-
stance that the tilt sensor is correctly calibrated.
Slopes that exceed the specied 45% slope can nor-
mally only be reached in very favorable conditions. Do
not expect the mower to operate regularly in a working
area with such steep inclines.
3.10 New loop signal
The PIN code in the robotic lawnmower is simply an
anti-theft function to prevent unauthorized people from
using the mower. It does not affect the loop signal in
any way, which the PIN code in Husqvarna G2 models
does.
In rare cases, there may be a reason to change the
loop signal, for example, if 2 nearby installations have
the same loop signal, thereby interfering with each
other. An option exists to generate a randomly select-
ed new loop signal via the Security - New loop signal
menu.
This also needs to be carried out every time the ro-
botic lawnmower is placed in another charging sta-
tion. Bear in mind that a new loop signal also has to
be generated when the mower returns to its ordinary
charging station, for example after service if another
charging station other than the customer's has been
used. Refer to 3.6 One robotic lawnmower for several
working areas on page 41.
Table 2: Slope conditions
Percentage
(%)
Height-length ratio
(1, X)
Degrees (
o
)
10 1:10 6
20 1:5 11
23 1:4.3 13
30 1:3.3 17
40 1:2.5 22
45 1:2.2 24
50 1:2 27
67 1:1.5 34
3. INSTALLATION

Table of Contents

Other manuals for Husqvarna AUTOMOWER 430X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna AUTOMOWER 430X and is the answer not in the manual?

Husqvarna AUTOMOWER 430X Specifications

General IconGeneral
Product NameHusqvarna AUTOMOWER 430X
CategoryLawn Mower
Cutting Width24 cm
Cutting Height Min20 mm
Cutting Height Max60 mm
Battery TypeLi-ion
Typical Charging Time50 min
Maximum Incline Within the Working Area45 %
Cutting System3 pivoting razor blades
GPS-assisted NavigationYes
Lift SensorYes
Tilt SensorYes
Ultrasonic SensorNo
Battery Voltage18 V
Weight13.2 kg
ConnectivityBluetooth, Cellular
Weather ResistanceYes
Warranty2 years

Related product manuals