Husqvarna AUTOMOWER 430X Technical Manual

English - 44
4 Autocheck Experience,
service program
The Autocheck EXP service program is a tool to use
in connection with service of robotic lawnmowers
from Husqvarna. Its uses include:
• Updating software in the robotic lawnmower
• Troubleshooting the robotic lawnmower
• Reading information from the robotic
lawnmower
• Setting the robotic lawnmower
• Reading documents applicable to the
robotic lawnmower
Autocheck EXP is intended for robotic lawnmowers
from and including the 2003 model. The program
does not work on earlier models.
The robotic lawnmower is connected to the computer
using a service cable. There are 2 different cables:
• USB cable with service connector of a
standard USB type for Husqvarna G3
models (e.g. Automower® 420, 430X and
450X).
• USB cable with a special type of service
connector for Husqvarna Automower® G2
models (e.g. 220AC, 230 ACX, Solar Hybrid
and 265 ACX).
4. AUTOCHECK EXPERIENCE, SERVICE PROGRAM

Husqvarna AUTOMOWER 430X Specifications

General

Product Name	Husqvarna AUTOMOWER 430X
Category	Lawn Mower
Cutting Width	24 cm
Cutting Height Min	20 mm
Cutting Height Max	60 mm
Battery Type	Li-ion
Typical Charging Time	50 min
Maximum Incline Within the Working Area	45 %
Cutting System	3 pivoting razor blades
GPS-assisted Navigation	Yes
Lift Sensor	Yes
Tilt Sensor	Yes
Ultrasonic Sensor	No
Battery Voltage	18 V
Weight	13.2 kg
Connectivity	Bluetooth, Cellular
Weather Resistance	Yes
Warranty	2 years