To Next PageTo Next Page
Need help?Do you have a question about the Hy-Security 222 CF and is the answer not in the manual?
Details on various gate operator models and their capabilities.
Welcome and overview of the installation and maintenance manual.
Crucial safety guidelines and pre-installation checks for gate operation.
Essential safety and operational advice for gate owners and users.
List of necessary tools for proper gate operator installation.
Overview of hydraulic operator function, accessory compatibility, and sensor needs.
Step-by-step checklist to prepare for gate operator installation.
Detailed steps for the physical installation of the gate operator.
Guide to adjusting drive wheels, drive rail, brake valves, and pressure relief.
Fundamental guide to navigating and operating the Smart Touch Controller.
Steps to configure operator handing and UL usage class settings.
Explanation of wiring external control devices to the controller.
Instructions for configuring two operators to work as a master/slave pair.
Overview and default settings for user-accessible menu functions.
List and descriptions of advanced installer menu options for configuration.
Detailed explanations of each function available in the User Menu.
Detailed explanations of each function available in the Installer Menu.
Specific wiring instructions for correctional facility applications.
Descriptions of various output relay functions for external device control.
Compliance requirements for entrapment protection devices under UL 325.
Guidelines for positioning and utilizing entrapment protection sensors.
Step-by-step instructions for installing contact-type gate edge sensors.
Detailed guide for installing photoelectric sensors.
General information and rules for installing vehicle detection loops.
Various options for connecting vehicle detectors to the controller.
Information on diagnosing and resolving detector and loop faults.
Configuration options for vehicle detector logic and anti-tailgate features.
How to connect and program the 24-hour/7-day timer function.
Instructions for connecting a radio receiver for remote operation.
Guide for installing, activating, and adjusting the internal solenoid lock.
Routine maintenance procedures for hydraulic and electrical systems.
Critical notes and precautions for DC powered gate operators.
Specific wiring and control configurations for DC battery-powered units.
Charts detailing correct wire sizes for power and control wiring.
Visual breakdown of operator components and their part numbers.
Terms and conditions of the Hy-Security gate operator limited warranty.
General| Model | 222 CF |
|---|---|
| Category | Gate Opener |
| Power | 1/2 hp |
| Voltage | 115/208/230 VAC |
| UL Rating | UL 325 |
| Max Gate Length | 20 ft |
| Gate Type | Swing |
| Control Options | Keypad |
