" $"$'(!(
' '
$)
*
"
# !!
"*
"
!
" *
#
' '
(
' (
"*" !
'& &
!" !
!
!
" *
#
!
5 HORSE POWER DRIVE
SPEED ADJUSTOR INSTALLATION IN
STRUCTIONS AND PARTS LIST.
The speed adjustor is packaged seperately for
shipping purposes. Installation of the speed adjustor
must be completed prior to connecting the power
supply.
Remove the assembly from the coolant reservoir
and remove the wrapping. Rotate the handwheel of the
speed adjustor completely counter clockwise. Hold the
assembly so that the speed clock decal faces you.
Rotate the assembly until 75 suface feet per minute on
the decal is positioned at the 12 O'clock position. Hold
the cup of the speed adjustor assembly with one hand
while rotating the body of the speed adjustor assembly
until the needle alignes with 75 surface feet per minute
at the 12 O'clock position.The assembly is now ready
to be bolted to the outer cover of the variable speed
drive housing using the four 5/16" x 3/4" hex head bolts
(Item #2, B1-.312x.75).
To Next Page
