HygroMatik Basic-DS - Page 45

SPA
Page 45
» press
» press
» press
» press
» press
» press
»
» press
» press to exit the submenu
» the modification must be confirmed to be permanently saved;
to do this press
» press to exit the menu
A4 Stand-By Blow-Down
If the controller or hygrostat demands no humidity from the humidifier
for a long period of time, it is advisable to flush out the cylinder water.
At Parameter A4 Stand-By Blow-Down, the time period is set after
which the complete blow-down is automatically performed. Water will
not be fed into the cylinder until a new demand signal is received.
Parameter Settings
Code 010
ESC
Maintenance
Parameters
ESC
Maintenance
interval
P2: 3:00
ESC
Reset maintenance
Interval
P3: No
ESC
Reset Maintenance
Interval
P3: N
o
ESC
Reset Maintenance
Interval
P3: Y
es
ESC
Reset Maintenance
Interval
P3: Yes
ESC
Maintenance
Parameters
ESC
Confirm changes
with Enter
yes
Parameter Settings
ESC
Steam Bath
41,5 °C
°C F E L