Page 46
Programming sequence to modify the language:
press
press
select the desired language with or
confirm with
Exit the language menu with
Changes to the language are saved even when the unit is turned
off.
7.3.2 Start-Up Parameters Menu
The start-up menu comprises settings and parameters that may
be needed for humidifier start-up.
Navigation to the submenu “start-up parameters” is protected
from unauthorized access by an access code request. The
access code is “010”.
The start-up menu is divided into four submenus.
•System Test
• Control Parameters
7.3.2.1 Control Parameters Submenu
Parameters for adjusting to the control signal, and related con-
trol characteristics, as well as for steam generation output limita-
tion, are located in this submenu.
Summary of parameters:
Para-
meter
Description Possible Settings Access
Code
P1 Steam genera-
tion output limiter
[%]
[25-100%] 010
E1* Xp-PI-controller
=100/E1
[Amplification]
[0- 100] 010
E2* Tn-PI-controller
[Integration time]
[0- 255sec.] 010
Sprache/Language
English
ESC
To Next Page
Loading...
