Page 22
4. Basic - Control
The functional microprocessor control Type Basic is set to the
standard requirements of the user in the customer’s usage and
information materials.
It features:
• integrated P-controller function for use with HygroMatik
humidity sensor Type HP 148 (duct) or HRP (room)
• proportional or 1 step controls
• 5 indicator lamps for readout of important operating data
and fault messages
• 1 potentialfree remote signal (4 additional signals optional
for relay PCB)
• Fuzzy Logic
• Stand-By blow-down
to prevent standing cylinder water. After
a long period of time without steam production, the cylinder is
completely drained.
4.1 Basic Controls
The HygroMatik Control Type Basic accepts the control types
indicated below:
Controls, Basic Control
1 step control (on/off)
Proportional control with external controller
Proportional Control with Hygromatik
Hygrostat Type HPH or Type HRP
To Next Page
Loading...
