HygroMatik Basic - Parameter Setting Menu

Page 51
7.3.4 Parameter Setting Menu
Parameters partly determine the humidifier’s sequence of opera-
tions and processing of signals.
These parameters can be modified as needed.
For security reasons, access to some parameters is protected
by an entry code. Two separate access levels have been
defined:
• Basic customer level” without access code
• Advanced customer level” with access code “010”
The “Parameter Setting” menu is divided into five submenus:
• Maintenance Parameters
• Control Parameters
• Blow-Down Parameters
• Time Clock
• Data Parameters
If access to the “Parameter Settings” menu is gained by entering
access code “010,” an expanded set of parameters is available
compared to access without a code entry.
The pages below provide a summary table of parameters con-
taining the following:
• parameter designation
• possible parameter value settings
• Menu/submenu where the parameter is located
• required access code for the parameter
At the end of the summary table, the parameters are described
in detail; examples of programming sequences for parameter
setting are provided with and without access codes.
Access Code 010