1 | P a g e
About this User Manual
This user manual provides the information on Installation and maintenance of the Orion HF310-G4.
Caution: Experienced technicians should perform the Installation and maintenance.
Document title: ORION HF310-G4
Document number:
Document update date: September 2020
The following Notes, Cautions and Warnings might appear in this user manual.
Note: Explains an important point or tip to help you to better use of the product.
Caution: Indicates the potential damage to hardware or loss of data, security problems, or performance issues and tells you to avoid the problem.
Warning: Indicates that an action or step can result in physical harm, property or hardware damage.
To avoid damaging your server, perform the following steps before you begin working inside the server.
1. Ensure that you follow the Safety Instruction.
2. Ensure that your work surface is flat and clean to prevent the server cover from being scratched.
3. Turn off your server.
4. Disconnect all network cables from the server.
CAUTION: To disconnect a network cable, first unplug the cable from your server and then unplug the cable from the network device. After you finish
working inside the server, replace all covers, panels, and screws before connecting to the power source.
Safety instructions
Use the following safety guidelines to protect your server from potential damage and to ensure your personal safety. Unless otherwise noted, each procedure
included in this document assumes that the following conditions exist:
You have read the safety information that shipped with your server.
A component can be replaced or, if purchased separately, installed by performing the removal procedure in the reverse order.
Copyright @ 2020 Ciara, All rights reserved.
To Next Page
Loading...