Hypertherm HyPerformance HPR400XD - Ignition Console - 078172

SPECIFICATIONS
HPR400XD Manual Gas Instruction Manual 2-7
Ignition console – 078172
• The ignition console can be mounted remotely on the cutting table’s bridge. See Installation section for details.
• Maximum cable length from the ignition console to the torch lifter station is 15 m (50 ft). Allow room to remove
the top for servicing.
• The ignition console may be mounted horizontally or vertically.
9.1 kg
20 lb
283 mm
11.125"
219 mm
8.625"
194 mm
7.625"
152 mm
6"
216 mm
8.5"