DANGER
ELECTRICAL SHOCK CAN KILL
Remove all electrical connections to the power supply before moving or positioning. Transporting
the unit can cause personal injury and equipment damage.
• Place the power supply in an area that is free of excessive moisture, has proper ventilation, and is relatively
clean. Allow 1 m (3 ft) of space on all sides of the power supply for ventilation and service.
• Cooling air is drawn in through the front panel and is exhausted through the rear of the unit by a cooling fan. Do
not place any filter device over the air intake locations, which reduces cooling efficiency and VOIDS THE
WARRANTY.
• Do not place the power supply on an incline greater than 10°, to prevent it from toppling.
To Next Page
Loading...
