INSTALLATION
3-16 HPR400XD Manual Gas Instruction Manual
Placement of the cooler
• Place the cooler in an area that is free of excessive moisture, has proper ventilation, and is relatively clean. Allow
1 m (3 ft) of space on all sides of the power supply for ventilation and service.
• Cooling air is drawn in through the front panel and is exhausted through the rear of the unit by a cooling fan. Do
not place any filter device over the air intake locations, which reduces cooling efficiency and VOIDS
THE WARRANTY.
• Do not place the cooler on an incline greater than 10° to prevent it from toppling.
To Next Page
Loading...
