Safety-2 D0536 Rev. C StrongArmParkDC: Programming & Operations Manual www.hysecurity.com
notICes and BulletIns
Installers should visit HySecurity’s online Technical Support page at www.hysecurity.com or contact HySecurity
prior to installing product to make sure they have received the most up-to-date information.
supplemental doCuments
The product literature is comprehensive and contains information needed to plan, install, operate and maintain
your gate operator. Additional general information concerning HySecurity gate operators can be obtained from
the following:
• HySecurity web site www.hysecurity.com - Contains links to the product catalog, product order form, operator
manuals, operator software downloads, technical support bulletins and other useful information.
• S.T.A.R.T. - Smart Touch Analyze and Retrieve Tool - User’s Guide (D0049) detailing the extensive software, diagnos-
tic and troubleshooting capabilities of the Smart DC Controller board.
• Technical Bulletins (as applicable).
NOTE: Technical Bulletins are automatically issued to registered users of HySecurity products. The product war-
ranty registration card can be lled out online at www.hysecurity.com.
Hazardous materIals and proper dIsposal
Be aware of the international, federal, and local codes in your area and how best to handle hazardous waste
materials.
The pump pack uid, found in all hydraulic HySecurity operators, can be recycled. Gear oil, found in HySecurity
electromechanical gate operators, can also be recycled. If the uids are mixed or contaminated with any solvents
or other chemicals, they become hazardous waste. Hazardous waste requirements for storage and disposal must
be followed.
CAUTION
If the gate operator has a battery backup system, the batteries contain materials that are considered
hazardous to the environment. Proper disposal of the battery is required by federal law. In the U.S.A., refer
to federal EPA guidelines for proper hazardous waste disposal.
To Next Page
Loading...
Need help?
General
