1
1. Foreword
Thank you for purchasing the Robo Cylinder Actuator. This manual explains the structure, correct operation
and maintenance of the Robo Cylinder Actuator. Please read this manual carefully before using the actuator.
For more complete information on operating the actuator, please refer to the controller operating manual.
2. Safety Precautions
2.1 Basic Operating Instructions
• Please do not attempt to use or operate the actuator in any manner not indicated in this manual or the
controller manual.
• Please make sure to use only the cable provided by IAI to connect the actuator and controller.
• Please do not allow people within the moving range of the unit when it is in operation or when the power is
ON since this is dangerous.
2.2 Maintenance and Inspection
• When doing maintenance and inspection work, always shut down the controller power first.
• When doing inspection, make sure that no one can inadvertently turn the power ON.
• Make sure that a sign indicating work in progress is clearly visible.
• If several persons are working, make sure to watch out for each other's safety. In particular, check before
turning power ON or OFF and let others know if you are doing work involving axis movement.
(Note)
• The content of this manual is subject to change without notice for the purpose of improvement.
• This manual was created with utmost attention to accuracy. Should you find any error, however, or if you
have any question, please contact IAI’s Sales Engineering or Technical Service Section.
To Next Page
Loading...
