1
1. Foreword
Thank you for purchasing the Robo Cylinder Actuator. This manual explains the structure, correct
operation and maintenance of the Robo Cylinder Actuator. Please read this manual carefully before using
the actuator. For more complete information on operating the actuator, please refer to the controller
operating manual.
2. Safety Precautions
2.1 Basic Operating Instructions
• Please do not attempt to use or operate the actuator in any manner not indicated in this manual or the
controller manual.
• Please be sure to use only the cable provided by IAI to connect the actuator and controller.
• Please do not allow people within the moving range of the unit when it is in operation or when the
power is ON since this is dangerous.
2.2 Maintenance and Inspection
• When doing maintenance and inspection work, always shut down the controller power first.
• When doing inspection, make sure that no one can inadvertently turn the power ON.
• Make sure that a sign indicating work in progress is clearly visible.
• If several persons are working, be sure to watch out for each other's safety. In particular, check before
turning power ON or OFF and let others know if you are doing work involving axis movement.
(Notes)
• The contents of this manual are subject to change without notice for the purposes of improvement.
• This manual has been written with the utmost attention to accuracy. However, it is possible that the
manual may still contain technical inaccuracies or typographical or other errors. Should you come
across any inaccuracy or if you have any feedback regarding this manual, please contact IAI.
To Next Page
Loading...
Need help?
General
