IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer

Table 13. MCT command definitions (continued)
DEC HEX MCT Default Min Max
30 1E Mode options
Bit 13: (DI portrait mode only)
v 1 = Line feeds NOT executed
until DI ready. (Epson mode)
v 0 = Line feeds are executed
without regard for the state of
DI ready. (IBM mode)
Bit
14:
v 1 = Normal operations (IBM
mode)
v 0 = Switch order of font A
and font B (Epson mode)
Bit
15:
v 0 = Disable CR (X'0D') in CR
station. No line feeds in DI.
(Epson mode)
v 1 = Normal operations. Treat
CR (X'0D') the same as line
feeds (X'0A'). (IBM mode)
X'FFFF' N/A N/A
31–53 1F–35 Reserved – IMPORTANT: Changing these values might damage the printer.
54 36 TI8 only: Reserved – IMPORTANT: Changing these values might damage the printer.
TI3, TI4, TI5, TI6, and TI7:
Bits 9–15:
Reserved for future use
Bit 8:
v 1 = Function disabled
v 0 = DBCS page mode,
underline moved up two dot
rows
Bits
2–7:
Reserved for future use
Bit 1:
v 1 = Function disabled
v 0 = CR; paper is cut when
button is pressed for at least
120 motor steps
Bit
0:
v 1 = No mapping of user flash
storage
v 0 = Map user flash storage to
logo space
X'FFFF' X'0000' X'FFFF'
55–159 37–9F Reserved – IMPORTANT: Changing these values might damage the printer.
160 A0 User-defined impact character memory
allocation
X'0001' X'0000' X'FFFF'
August 24, 2004
124 SureMark Printers User’s Guide
|
||||||
|||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|||
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|||