IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer

Page mode printing commands
Select page mode
RS-485 Syntax:
X'1B;4C'
RS-232 Syntax:
ESC L or X'1B;4C'
Remarks:
v Enables page mode printing.
v Supported on thermal station only.
v Starting position is set by Set printable area X'1B;57..' and Set print
direction X'1B;54..' commands.
v Inter-character spacing X'1B;20;n' and line spacing X'1B;31', X'1B;32',
X'1B;33' commands are set independently for page mode and standard
mode.
v The following commands are allowed:
– Rotate characters
– Set alignment
– Set/Clear upside-down
– Set margins
Select standard mode
RS-485 Syntax:
X'1B; 4f'
RS-232 Syntax:
ESC O or X'1B;4f'
Epson emulation syntax:
ESC S or X'1B;53'
Remarks:
v This command is effective in page mode only.
v Data buffered in page mode is cleared.
v This command sets the print position to the beginning of the line.
August 24, 2004
178 SureMark Printers User’s Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|