IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Character Description ASCII Representation hex value returned
MICR data representation
0–9 Numerical data
blank
Unreadable
Character
0–9
?
30–9
20
3F
E13-B - Special characters
Dash - 2D
Transit T 54
On Us A 41
Amount $ 24
CMC7 - Special characters
Special character 1 a 61
Special character 2 b 62
Special character 3 c 63
Special character 4 d 64
Special character 5 e 65
Error Conditions:
Document feed error (status byte 7). This bit is set if the inserted check is
too long. The maximum check length is 10 inches. The error is also set if
the check does not clear the document sensor when expected.
Flip check
RS-232 Syntax:
ESC 5 or X'1B35'
Purpose:
To flip the check after a MICR read. This will allow the face of the check to
be printed.
Remarks:
v Set print station to document landscape mode to print the face of the
check.
v This command takes 5 seconds to complete.
v This command increments the line count (status byte 6).
v If landscape is selected before a check flip is done, when the check flip
is completed, the printer starts printing in landscape mode without
measuring the document first.
Error
Conditions:
Document feed error (status byte 7). This bit is set if the inserted check is
too long. The maximum check length is 10 inches. The error is also set if
the check does not clear the document sensor when expected.
August 24, 2004
160 SureMark Printers User’s Guide

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English