IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer

Default:
n = 01
Remarks:
Changing code pages is valid for resident character sets only. If
user-defined character sets are enabled, this command will not do anything.
Set inter-character spacing
RS-232 Syntax:
ESC SP n or X'1B20;n'
where:
n The number of dot-spaces in the thermal print station or half-dot
spaces in the impact print station.
Default:
n = 03
Maximum:
n = 08
Remarks:
If you select double-width printing, the space to the right of each character
is doubled.
Set or cancel rotated characters
RS-232 Syntax:
ESC V n or X'1B56;n'
where:
n=00 Cancel Rotated Characters
n=01 Set Rotated Character
n=02 Code Page 863 - Canadian-French
Default:
n = 00
Remarks:
Rotation is 90 degrees clockwise. This command is supported only in the
thermal print station.
August 24, 2004
132 SureMark Printers User’s Guide