IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer

Setting Default Value
Print Mode 00
Print Station Selected 02
User-Defined/Resident Character Sets 00
Code Page 01
Intercharacter Spacing (SB) 03
Rotated Characters 00
Station for line spacing 02
Line Spacing all stations Six LPI
Tab Positions every 100 dots
Left Margin 00
Relative Position 00
Align Positions 00
Unidirectional printing 00
Horizontal Size of Bar Code 03
Vertical Size of Bar Code A2
Position of HR 00
Font for HRI 00
Error Conditions:
None
Enable or disable the feed buttons (Models TI3, TI4, TI8, TG3, and TG4
only)
RS-485 Syntax:
X'1B;63;35;n'
RS-232 Syntax:
ESC c 5 n or X'1B;63;35;n'
where:
n=0 Enables feed buttons
n=1 Disables feed buttons
Default:
n = 0
Purpose:
To disable the feed buttons while in the middle of a transaction.
Remarks:
If the printer is set to have the buttons disabled, the offline tests will also be
disabled. Supported on all models except TI1 and TI2.
August 24, 2004
140 SureMark Printers User’s Guide
||
|
|
|