IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer

Summary of Changes
This section summarizes the changes included in the latest editions of this manual.
Web-only update for corrections to GA27-4151-05 (August 2004)
Corrections and clarifications for:
v “Paper specifications” on page 79
v “Microcode tolerance (MCT) information - request” on page 123
v “Reinitialize the printer” on page 139
v “Start scan” on page 169
v “Select standard mode” on page 178
v Minor changes to formatting
Web-only update for corrections to GA27-4151-05 (August 2003)
Corrections and clarifications for:
v “Document scanner calibration (Model TI8)” on page 59
v Minor changes to formatting
Web-only update for Model TI8, GA27-4151-05 (April 2003)
This update adds the new Model TI8 to this User’s Guide. This model provides
document-scanning capability and a powered flipper. Revision bars in the left
margin indicate new or changed information.
Web-only update for GA27-4151-04 (March 2002)
This update contains changes to the paper loading procedure for Models TF6 and
TM6.
Web update for GA27-4151-04 (June 2001)
This update contains the following changes and additions:
v The location of the Euro character for code page 858 has been corrected. See
“Code page 858” on page 91.
v Information on the new models TG3 and TG4.
v Command format details about barcodes 128a and 128b.
v Flash memory usage message. See 120.
v New table for Code 128 character set. See Table 17 on page 146.
v The commands in Appendix C, “RS-232 programming information,” on page 97
are to be used for RS-232 connections only. Additional information about where
to find commands when using RS-485 or USB communications has been added
to the beginning of that appendix.
GA27-4151-04
This edition adds information about the new single-station SureMark printers, which
are models TF6 and TM6, and also about updates for models TI3 and TI4.
Changes for this edition include:
August 24, 2004
© Copyright IBM Corp. 1997, 2004 xix
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|