IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer - Page 50

3. For single-station printers, route any power cord and cables as shown in
Figure 11.
4. Connect the USB communication cable to the correct port.
5. Connect any other signal cables for I/O devices to the correct ports.
Power supply port
Powered USB port
Standard USB port
Cash drawer connector
Figure 10. USB Ports for Single-Station SureMark Printers. (View is from the bottom rear of
the printer)
Cash drawer cable
Power cord
Standard USB cable
Cash drawer cable
Powered USB cable
Figure 11. USB Cable Routing for Single-Station SureMark Printers
August 24, 2004
22 SureMark Printers User’s Guide