IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Table 3. Troubleshooting – Models TI1, TI2, TI3, TI4, TI8, TG3, and TG4 (continued)
If the problem is... Here’s what to do...
Document insert station is not
printing
v Check the paper path.
v Check to see if the ribbon is installed correctly.
v Change the ribbon, go to “Ribbon loading” on page 51.
Scanned images streaked, too
light, or too dark
v Clean the scanner window. Go to “Document scanner cleaning (Model TI8)”
on page 58.
v Calibrate the scanner. Go to “Document scanner calibration (Model TI8)” on
page 59
v Clean or replace the registration plate.
Notes:
1. Record all symptoms before calling for service.
2. If you receive software error messages, refer to the application program’s
software manual.
3. Call your service representative.
August 24, 2004
Chapter 5. Testing and problem analysis (Models TI1, TI2, TI3, TI4, TI8, TG3, and TG4) 67

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English