IBM 6.1.8.2 - Page 42

Table 3. Specications for a dual-socket utility node (continued)
Processor Quantity per socket type (2) AMD socket SP3
Supported CPU series (2) AMD EPYC 7002/7003 series
processors
Congurable thermal design
power (cTDP) wattage
Maximum of up to 240 W
Memory Max DIMM 16 + 16 DIMM slots
DIMM type or speed DDR4 ECC RDIMM/RDIMM3DS/
LRDIMM/LRDIMM 3DS 3200
Capacity Up to 8192 GB RDIMM
Memory channel Eight channels per CPU
Memory voltage 1.2 V
Expansion slots PCIe
• One PCIe Gen 4 x16 slot (HH,
10.5 in. L)
• One PCIe Gen 4 x16 slot (HH,
HL)
Preinstalled 2U riser card (PCIe
Gen 4)
• One CARISER-T75-L24 riser
card for one HH/10.5 in. L PCIe
Gen 4 x16 slot (left)
• One CARISER-T75-L16 riser
card for one HH/HL PCIe Gen
4 x16 (left)
Others One PCIe Gen 4 x16 OCP 3.0 slot
Physical dimension abbreviation FH/FL (full-height, full-length):
4.4 in. x 12.3 in. (111.2 x 312
mm)
LAN Quantity per port
• Two 10 GbE ports
• One 1 GbE port dedicated for
IPMI
Controller Intel X550-AT2
PHY Realtek RTL8211E (for IPMI)
22IBM Storage ScaleSystem Utility Node: Hardware Planning and Installation Guide