3. Slide the cover forward to the closed position until the releases click into place in the cover.
4. Install the compute node into the IBM Flex System Enterprise Chassis. See “Installing the compute
node in an IBM Flex System Enterprise Chassis.”
Installing the compute node in an IBM Flex System Enterprise Chassis
Install the compute node in an IBM Flex System Enterprise Chassis to use the compute node.
About this task
Statement 21
CAUTION:
Hazardous energy is present when the compute node is connected to the power source. Always replace
the compute node cover before installing the compute node.
To install a compute node in an IBM Flex System Enterprise Chassis, complete the following steps:
Procedure
Figure 44. Installing the compute node in an IBM Flex System Enterprise Chassis
Chapter 6. Installing and removing components 93
To Next Page
Loading...
