632CFF3D
Explanation: Informational system log entry only.
Service action / serviceable event: No
Called home automatically: No
Response: No corrective action is required.
632CFF6D
Explanation: Informational system log entry only.
Service action / serviceable event: No
Called home automatically: No
Response: No corrective action is required.
A1xxyyyy service processor SRCs:
An A1xxyyyy system reference code (SRC) is an attention code that offers information about a platform
or service processor dump or confirms a control panel function request. Only when you experience a
hang condition should you take any of the actions described for an attention code.
If the system hangs on an attention code, follow the suggested actions in the order in which they are
listed until the problem is solved. If an action solves the problem, you can stop performing the remaining
actions. See Chapter 7, “Parts listing for IBM Flex System p260 and p460 Compute Nodes,” on page 97 to
determine which components are CRUs and which components are FRUs.
A1XXYYYY
Explanation: Attention code
Response:
1. Go to Checkout procedure.
2. Replace the system board and chassis assembly, as described in Replacing the system-board and chassis assembly.
A2xxyyyy logical partition SRCs:
An A2xxyyyy SRC is a logical partition reference code that is related to logical partitioning.
A2D03000
Explanation: User-initiated immediate termination and MSD of a partition.
Response: No corrective action is required.
632CFF3D • A2D03000
134 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
To Next Page
Loading...
