Reliability and service features:
v Dual alternating current power
supply
v IBM Flex System Enterprise Chassis:
chassis redundant and hot-plug
power and cooling modules
v Boot-time processor deallocation
v Compute node hot plug
v Customer setup and expansion
v Automatic reboot on power loss
v Internal and chassis-external
temperature monitors
v ECC, chipkill memory
v System management alerts
v Light path diagnostics
v Electronic Service Agent
™
call-home
capability
Electrical input: 12 V dc
Security: Fully compliant with NIST
800-131A. The security cryptography
mode set by the managing device
(CMM or FSM node) determines the
security mode in which the compute
node operates.
See the ServerProven website for information about supported operating-system versions and all compute
node optional devices.
Features and specifications of the IBM Flex System p460 Compute
Node
Features and specifications of the IBM Flex System p460 Compute Node are summarized in this
overview.
The IBM Flex System p460 Compute Node is the two-bay symmetric multiprocessing (SMP) unit and is
used in an IBM Flex System Enterprise Chassis.
Notes:
v Power, cooling, removable-media drives, external ports, and Advanced System Management (ASM) are
provided by the IBM Flex System Enterprise Chassis.
v The operating system in the compute node must provide support for the Universal Serial Bus (USB) to
enable the compute node to recognize and communicate internally with the removable-media drives
and front-panel USB ports.
Chapter 1. Introduction 7
To Next Page
Loading...
Need help?
General