IBM Flex System p260 - Explanation: the System Halted While Diagnostics Were Executing; Go to Performing the Checkout Procedure or Problem Resolution; Response: Failing Item

110-101
Explanation: The diagnostics did not detect an installed resource. If this SRN appeared when running concurrent
diagnostics, then run concurrent diagnostics using the diag -a command.
Response:
110-921
Explanation: The system halted while diagnostics were executing.
Go to Performing the checkout procedure or problem resolution.
Note: xxx corresponds to the last three digits of the SRN.
Response:
Failing Item:
v FFC_812
v FFC_XXX
110-922
Explanation: The system halted while diagnostics were executing.
Go to Performing the checkout procedure or problem resolution.
Note: xxx corresponds to the last three digits of the SRN.
Response:
Failing Item:
v FFC_812
v FFC_XXX
110-923
Explanation: The system halted while diagnostics were executing.
Go to Performing the checkout procedure or problem resolution.
Note: xxx corresponds to the last three digits of the SRN.
Response:
Failing Item:
v FFC_812
v FFC_XXX
110-101 • 110-923
Chapter 8. Troubleshooting 307