AA260001
Explanation: Enter the Type Model Number (Must be 8 characters)
Response: Enter the machine type and model of the server at the prompt.
AA260002
Explanation: Enter the Serial Number (Must be 7 characters)
Response: Enter the serial number of the server at the prompt.
AA260003
Explanation: Enter System Unique ID (Must be 12 characters)
Response: Enter the system unique ID number at the prompt.
AA260004
Explanation: Enter WorldWide Port Number (Must be 12 characters)
Response: Enter the worldwide port number of the server at the prompt.
AA260005
Explanation: Enter Brand (Must be 2 characters)
Response: Enter the brand number of the server at the prompt.
B1xxyyyy service processor SRCs:
A B1xxyyyy system reference code (SRC) is an error code that is related to an event or exception that
occurred in the service processor firmware.
To find a description of an SRC that is not listed in this IBM Flex System p260 Compute Node or IBM
Flex System p460 Compute Node documentation, refer to the POWER7 Reference Code Lookup page at
http://publib.boulder.ibm.com/infocenter/systems/scope/hw/index.jsp?topic=/ipha8/codefinder.htm.
Note: For problems persisting after completing the suggested actions, see “Solving undetermined
problems” on page 498.
B15611A9
Explanation: The service processor could not communicate with the Chassis Management Module.
Response: Go to Reseating the compute node in a chassis.
AA260001 • B15611A9
Chapter 8. Troubleshooting 143
To Next Page
Loading...
