Related reference:
Chapter 7, “Parts listing for IBM Flex System p260 and p460 Compute Nodes,” on page 97
The parts listing identifies each replaceable part and its part number.
Related information:
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/
Removing a network adapter
If your network adapter needs to be replaced, you can remove it from its connector in a compute node.
About this task
Figure 28. DIMM connectors for the IBM Flex System p460 Compute Node
Chapter 6. Installing and removing components 61
To Next Page
Loading...
Need help?
General